
Auto Tests
Copper, VDSL2, ADSL2+ and IP Triple-Play Test Set 71
Running Video-DSL Rate Prediction Tests and Viewing Results
³ Target SNR is the desired signal-to-noise ratio ranging from 0 to 31 dB.
Default value is 6 dB.
³ Recalculate button allows you to change the setup and re-evaluate the
rates.
To re-set parameters to view different results:
1. Press the up/down or left/right arrow keys to highlight the desired
parameter.
2. Press to display the list or select the value.
3. Press the up/down arrow keys to highlight the desired value.
OR
4. Press the left arrow key to erase the existing value, and then use the
alphanumeric keypad to enter a value. To cancel the entry, press .
5. Press to accept the value.
6. Press the up/down arrow keys to highlight the Recalculate button.
7. Press to recalculate rates for the new setup.
Multi-meter Tests
The multi-meter tests results pane
displays the measured values on tip,
ring, and ground, and the pass/fail
status of each digital multi-meter test.
Komentarze do niniejszej Instrukcji